Cropping

Grain growers encouraged to check storage infrastructure before harvest begins

By Rodney Woods

Grain growers are encouraged to consider upgrading and improving their storage infrastructure in advance of this year’s harvest.

Storage expert Chris Warrick said now was the ideal time for growers to “take a step back” and look at where storage could be enhanced.

“Those improvements don’t need to be complicated or expensive — simple tweaks and adjustments can make all the difference in ensuring successful and trouble-free storage of grain from this year’s harvest,” he said.

“Ultimately, we should aim for best practice storage management for safer and easier-to-use systems.”

Mr Warrick, who co-ordinates the Grains Research and Development Corporation’s Grain Storage Extension Project, has provided growers with straightforward practical advice on what they can do to improve their storage via a GRDC webinar that is also now available through the GRDC’s YouTube channel.

The grain storage upgrades webinar was the third in an ongoing series providing growers with convenient, timely and relevant information and advice about all aspects of storing grain on-farm.

In the latest recorded webinar, Mr Warrick — who is also a consultant with Primary Business — states that regular maintenance of storage is essential.

“Make use of the weeks before harvest to fix damaged hatches, repair rust and other damage, check the seals, and conduct a three-minute half-life pressure test if the silo is gas-tight sealable,” he said.

“As part of that pressure test, check the oil levels in the oil relief valves.

“And if you need to replace the valves, consider replacing them with a larger valve that lets more air through.”

Mr Warrick said although retro-sealing could be applied to existing storages, the cost of doing so could be high and the success rate low.

“Rather than retro-sealing, I would suggest investing the money in additional storages that are gas-tight sealable to the Australian Standard 2628.”

Adding aeration cooling to existing storages is a common form of upgrading infrastructure, providing considerable benefits in terms of grain quality and insect pest control.

Mr Warrick said installing one or two small fans per silo for efficient and effective cooling and venting should be considered.

He says a small investment in monitoring equipment is justified given the amount of valuable grain stored on-farm these days.

Mr Warrick said ladders and walkways should also be reviewed.

“It’s important to be able to get to the top of the silo via safe and easy access so you know what’s going on within the grain stored in respect to mould and insects,” he said.

“Existing ladders can be improved with a cage, platform and handrails, and a walkway across multiple silos is a safe way to monitor grain. When working at heights, a safety harness is also advisable.”

Tips to reduce hazards include:

■ Installing danger signs to advise of overhead powerlines, especially if tip trucks and augers operate nearby;

■ Installing danger signs to advise of phosphine fumigation being undertaken;

■ Removing any obstacles that pose a trip or head knock hazard;

■ Blocking off child access to ladders;

■ Considering guards on augers, belts and conveyors;

■ Levelling gravel bases under augers to reduce movement; and

■ Installing lighting for safe use of storage at night.

Meanwhile, three more free-of-charge grain storage webinars, facilitated by Birchip Cropping Group, will be conducted during the coming months:

■ November 12 — grain protectants; and

■ December 10 — aeration cooling.

For more information about the webinars and to register, visit: http://storedgrain.com.au/event/webinar-planning-storage/ or contact Amy Harwood by email at amy.harwood@bcg.org.au or by phone on 0456979561.

More information on all aspects of grain storage can be found on the GRDC’s Stored Grain information hub at: http://storedgrain.com.au/